Application areas:
TEADIT 24 HD is particularly well suited to compensate for out-of-parallel and/or damaged sealing surfaces, and where a certain remaining thickness is required.

Typical applications are heat exchangers, large containers, tank lids, pump housings, flanges, hand- and manholes, etc.

Technical data:
Temperature range:  - 240°C up to +260°C, for short periods up to +310°C
Chemical resistance:  resistant against all chemicals from pH 0-14 (except molten alkali metals and elemental fluorine at high temperature and pressure)
Pressure resistance:  vacuum up to 200 bar
Density:  1,0 g/cm3,   +/- 0,1g/cm3
Aging resistance: TEADIT 24 BF does not age (please note: adhesive tape has limited shelf life!)
Colour:  white

Product standard and recommended dimensions:

TEADIT 24 HD is available on spools, with self-adhesive strip.

When choosing the best suitable dimension of TEADIT 24 HD, one has to take the available bolt torque and possibly damaged and/or out-of-parallel gasket surfaces into account.

Disclaimer: Since all properties, specifications and application parameters shown throughout this product information are approximate and may be mutually influenced, your specific application should not be undertaken without independent study and evaluation for suitability. All technical data and advice given is based on experiences TEADIT have made so far.  Failure to select proper sealing products can result in damage and/or personal injury. Properties, specifications and application parameters are subject to change without notice. TEADIT & Sealing Devices do not undertake any liability of any kind whatsoever. Upon clicking through our product display range you acknowledge this disclaimer as effective and binding.