|
Revision: 00/250902
Description:
TEADIT double-jacketed gaskets are particularly
suited for applications like heat-exchangers and boilers. The gasket is
constructed of a soft, heat resistant, non-asbestos filler material, which
is completely enclosed in a two-piece metal jacket. When pass partition
bars are required, we offer a welded pass bar construction. With a welded
pass bar arrangement the fluid is retained by the primary seal at the inner
diameter of the gasket. Thus the primary seal maintains its function, providing
a seal of higher integrity.
Material standard:
Metal jacket: carbon steel, soft iron, 304 (1.4301), 316L (1.4404)
Filler material: graphite
Many standard bar configurations are available, special configurations
on request.
Advantages:
+ the metal jacket covering the filler material prevents contamination
+ ensures high elasticity and recovery
+ nearly any dimension and shape can be made
+ the welded construction of the bars results in two independent seals:
the primary seal at the inner diameter and the secondary seal at the outer
diameter.
Please do not hesitate to contact us if you need additional information
about this product.
|
Disclaimer:
Since all
properties, specifications and application parameters shown throughout
this product information are approximate and may be mutually influenced,
your specific application should not be undertaken without independent
study and evaluation for suitability. All technical data and advice
given is based on experiences TEADIT
have made so far. Failure to select proper sealing products can result
in damage and/or personal injury. Properties, specifications and application
parameters are subject to change without notice. TEADIT &
Sealing Devices do not undertake any liability of any kind whatsoever.
Upon clicking through our product display range you acknowledge this disclaimer
as effective and binding.
|
|
